There are two ways to set up your grill for grilling- over direct and over indirect heat. For foods that takes under 20 minutes (think burgers, steaks, fish, chicken breast) you will use a method called direct heat. The direct method means that food is cooked directly over the prepared coals.
So how do you set up your grill for direct cooking?
- Open the lid and place it on the rim of the grill using the hook inside the lid or in the Tuck-Away lid holder depending on the grill model.
- Remove the cooking grate and set aside.
- Open the bottom vent using the handle underneath the bowl.
- Place two lighter cubes on the charcoal grate and then place a Chimney Starter over the lighter cubes.
- If you do not have lighter cubes, soak some newspaper with olive oil, wad it up and place under the chimney starter and ignite though the holes in the bottom.
- Fill the upper chamber of the Chimney Starter with briquettes, lift up the Chimney Starter, and light the cubes or newspaper.
- Weber briquettes will take 15 to 20 minutes to light fully.
- When the charcoal is lightly coated all over with white ash, it is ready to go.
- Put on two protective barbecue mitts and carefully empty the coals onto the charcoal grate.
- Spread the coals, using a charcoal rake, in a tightly packed, single layer across one-half to two-thirds of the charcoal grate.
- Put the cooking grate in place, close the lid, open the top vent, and leave all the vents open.
- Let the cooking grate preheat for 15 minutes.
- Brush the cooking grates with a stainless steel grill brush to remove any leftover debris.
- Place food on the cooking grate.
- Close the lid of the grill and lift it only to turn food or to test for doneness at the end of the recommended cooking time.
